Advance Feature: How to Use the Push buttons
sh buttons
Pair( Secure with 128 bits-AES)
The Powerline AV standard uses 128-bit AES (Advanced Encryption Standard) to safely transmit data
between powerline adapters. For the powerline adapters to communicate with each other they all need to use
the same Network Membership Key (NMK). Otherwise, they cannot unscramble the encrypted data sent in
the powerline network.
The
Pair
button allows you to set up a secure powerline connection with other HomePlug AV compliant
powerline devices which also support the
Pair
feature.
Set Up a Powerline AV Network with the Pair button
You can connect a number of devices on a powerline network, but you can use the
Pair
button on only
two devices at a time.
Create a Powerline network using the Pair button
：
Step 1. Place Powerline adaptor A close to another Powerline adaptor B.
Step 2. Press the Pair button of Powerline adaptor A for 10 seconds, the Power LED will start blinking.
Step 3. Press the Pair button of Powerline adaptor B for 10 seconds, the Power LED will start blinking
Step 4. Press the Pair button of Powerline adaptor A for 2 seconds, the Power LED will start blinking.
Step 5. Press the Pair button of Powerline adaptor B for 2 seconds, the Power LED will start blinking
(This must be done within 120 seconds after pressing the Pair button of Powerline adaptor A.)
Step 6. Wait for about 60 seconds while your Powerline adaptor A and B are connecting. The Power LED on
both adaptors will stop blinking and light up when the connection is made.
Ethernet Powerline Adaptor
26
Summary of Contents for PA200AV
Page 15: ...Ethernet Powerline Adaptor 11 ...
