Ethernet Powerline Adaptor
15
;
Autoscan:
Shows the scanning status (Default is
“ON”
).
Device Name:
Shows the default device name. One may redefine or change the name by
clicking on the name and editing in place or by clicking the
“Rename”
button.
Password:
Shows the current password of the Ethernet Powerline Adaptor.
Quality:
Shows the quality of the Ethernet Powerline Adaptor connection.
Rate (Mbps):
Shows the current transmission rate of the selected Ethernet Powerline
Adaptor.
MAC Address:
Shows the Ethernet Powerline Adaptor’s MAC address.
;
Rename:
Click to change the name of the selected Ethernet Powerline Adaptor.
;
Enter Password:
Shows the supplied Ethernet Powerline Adaptor’s password (Initially left blank).
To set the Ethernet Powerline Adaptor password (Which is required when creating a private
network), click and select the device shown in the lower panel and click on the
“Enter Password”
button. Follow the pop-up dialog box to complete your password setting.
;
Add:
Click this button to add a remote Ethernet Powerline Adaptor to your network that is not on
the lower panel displayed list. You will advice to locate the passwords for all Ethernet Powerline
Adaptor you wish to manage and add them to the local logical network by clicking the
“Add”
button. Follow the pop-up dialog box to complete your setting.
;
Scan:
Click the
“Scan”
button to perform an immediate search of the Ethernet Powerline Adaptor
connected to the computer. The Management Utility will automatically perform the scanning
process and update the display every few seconds by default.
Summary of Contents for PA200AV
Page 15: ...Ethernet Powerline Adaptor 11 ...
