![background image](http://html1.mh-extra.com/html/a-j-antunes/ctx-200l/ctx-200l_equipment-manual_3138768008.webp)
Club ToasTer CTX-200l
8
P/N 1011038 06/09
McDonald’s
oPeratIoN (continued)
Club toaster settings
The following table describes the recommended Club
Toaster operating settings.
setting
Value
Bottom Temp. (Lower
Platen)
570°F (299°C)
Top Temp (Upper Platen) 570°F (299°C)
Speed (17 seconds)
2300
Note: If you wish to change any of the above set-
tings, contact the factory for instructions.
Viewing the Program Mode settings
Follow these steps to view these settings:
1. From the Ready or Wait modes, press and hold
the
PrGM
button for 3 seconds.
2. The following appears on the display:
Program Club
Press Select
3. If desired, use the
NeXt
or
PreV
button to scroll
through the following categories:
• Speed
• Units (F/C) (default setting is F)
• Top Temp
• Bottom Temp
4. When the desired category is reached, press
the
seleCt
button
oNCe.
This will cause the
selected category value to blink indicating it is in
edit mode.
Note: the current setting will be the fIrst setting
shown in the display.
5. Press the
PreV
or
NeXt
buttons while the value
is blinking to change adjust the setting.
Note: do Not change any of these settings for aNY
reason! for assistance in changing these options,
please call the factory.
6. When you are finished viewing settings, press the
PrGM
button to return to the Ready screen or
wait 10 seconds until the Ready screen appears.
Note: the unit will exit the Program Mode after 10
seconds of inactivity.
Light Buns Dark
MOTOR
PLTN
CT
PLTN
PRGM
NEXT
PREV
SELECT
ADJUST
BELTS
STOP/START
figure 6. adjusting toasting Quality
Ct unit status Mode
This mode provides feedback on unit performance. No
adjustments can be made in this mode. Also, the dis-
play remains on the selected screen in this mode until
you switch screens or exit the Unit Status mode.
Follow these steps to view the Unit Status mode:
1. From any operation mode (Ready or Wait) press
and hold the
adjust
button for 3 seconds.
2. The following appears on the display in sequence:
•
speed-Motor-set Pt
•
total Hours
•
Controls temp
(Air temperature inside the
electrical enclosure)
•
top temp
(Actual temperature and set point
temperature)
•
bottom temp
(Actual temperature and set
point temperature)
•
smart Kitchen
Network Not detected