Club ToasTer CTX-200l
11
P/N 1011038 06/09
McDonald’s
figure 9. Cleaning the belt Wraps
Note: do Not clean
the belt Wraps while
they are turning.
MaINteNaNCe (continued)
Cleaning and sanitizing the belt Wraps
1. Open the Front Cover and Top Cover (Figure 8).
Press
CT
(Figure 7) to temporarily stop the Belt
Wraps from turning.
2. Wearing heat-resistant gloves, wipe the outer
side of the upper Belt Wrap with a clean towel
dampened with
Mcd® all-Purpose super
Concentrate (aPsC) (HCs)
(Figure 9).
3. Press
CT
to rotate the Belt Wrap to expose the
uncleaned portion of the Belt Wrap. Then, press
CT
again to stop the Belt Wraps from turning.
4. Wipe the newly exposed portion of the Belt Wrap
with a clean towel dampened with
Mcd® all-
Purpose super Concentrate (aPsC) (HCs)
.
5. Next, sanitize the Belt Wrap by wiping it with
a clean towel dampened with
KaYQuat II™
sanitizer (HCs)
.
6. Press
CT
to rotate the Belt Wrap to expose the
uncleaned portion of the Belt Wrap. Then, press
CT
again to STOP the Belt Wraps from turning.
7. Wipe the newly exposed portion of the Belt Wrap
with a clean towel dampened with
KaYQuat II™
sanitizer (HCs)
.
8. Repeat steps 2 through 7 on the Lower Belt Wrap.
Note: be sure to clean and sanitize both belt
Wraps completely. failure to properly clean the belt
Wraps will shorten the life of the belt Wraps and
result in poor toaster performance.
Note: replace the belt Wraps if they show exces-
sive wear and tear. to obtain new belt Wraps, con-
tact the factory at 1-877-392-7854 (North america
only) or 630-784-1000.
Note: belt Wraps should be removed oNlY during
belt Wrap replacement or when required in a ser-
vice situation.
