8e6 Technologies Enterprise Filter Authentication R3000, User Manual

Page: 66 / 594

I
NTRODUCTORY
S
ECTION
C
HAPTER
3: S
YNCHRONIZING
M
ULTIPLE
U
NITS
42
8
E
6 T
ECHNOLOGIES
, R3000 E
NTERPRISE
F
ILTER
U
SER
G
UIDE
Synchronized, Non-Synchronized Items
It is important to note that while some items are synchro-
nized to the target R3000s, they do not become permanent
configurations on the target R3000. These items are in
essence functionally synchronized, since they are configu-
rations that the target R3000s will read from the source
R3000 upon load. These items will then be updated on an
as needed basis from the source R3000. For purpose of
differentiation, these items will be referred to as functionally
synchronized for purposes of this user guide. These func-
tionally synchronized items will be available for use on the
target R3000.
The following options are available for synchronization:
Synchronize all items (both profile and library changes), and
synchronize only library items.
As you will see by the lists on the following pages, static
configuration options—such as library changes—will be
synchronized. All active options—such as profile changes—
will be functionally synchronized. One time configuration
options on the R3000—such as reporting configurations, or
IP addresses—will not be synchronized.