2. Next, apply epoxy to the other side of
the bulkheads so you may put the other
fuselage side together. Dry fit and trim
any bulkhead that doesn’t allow for a
good fit.
Fuselage sides assembled.
Wing to Fuselage
1. The first step is to take the bottom-
front fuselage piece and attach it to the
fuselage piece. Take extra care to get a
tight fit. Pre-bending the piece
sometimes helps. Make sure the piece is
flush with the nose. NOTE: Your kit
contains a cockpit floor doubler piece
that is optional. It simply doubles the
floor thickness of the cockpit floor.