1. With your fuselage and wing
assembly completed, place the model
right side up. You will now attach the
previously assembled intake sides with
the doubler strips to the wing assembly
parallel to the fuselage body.
2. Align the intake sides with both the
outside of the intake bottom that is part
of the wing assembly and with the edge
of the rear fuselage piece you just
assembled in the previous step. The
doublers should be on the inside of the
intake.
Intake side placement. Make sure to
have the intake sides flush with the
outside intake edge.
Side view of assembled intake side.
Note: incorrect alignment front to back.
