- 31 -
System Configuration
Introduction
The system configuration can be easily done remotely on Internet Explorer through the
Web interface. There are two wizards in addition to classified categories of system
configurations. They can give friendly instructions and facilitate the setup job.
Alternately administrators may type directly the URL of system configuration,
“http://<IP address of Video Server>/setup/config.html”, to directly enter the
configuration page. If administrators also want to set certain options through the URL,
read the relative section in the Chapter Advanced Usage for reference. Video Server also
supports FTP to modify the system configuration file, CONFIG.INI, for technical usage.
The details are described in the Chapter Advanced Usage.
Since it is a networking video server, administrators should run “Setup wizard” or well
configure “Security”, “Network” and “Video” at least. To support external serial port
devices, configure “COM1” and “COM2” and then “Camera Setting” in “Video”. To
utilize the built-in features of security and web attraction, run “Application wizard” or
configure “Application” and “Demo”. Besides these features, administrators can adjust
the system date and time in “System”, or have different homepage layout by
configuring “Homepage layout”. Video Server also provides some system maintenance
like “View log file”, “View parameters” and “Factory default”.
Summary of Contents for IPVS4
Page 1: ......
