- 25 -
First access to Video Server in modem mode
If the dial-out is not prohibited and the attached modem is recognized, Video Server will
send out the system startup log and connection log by email or FTP according to user’s
settings as soon as the system is ready. That can be used to verify if the settings work.
Then Video Server will always wait for someone to dial in. To dial in Video Server, setup
a connection in dialup network on PC where the phone number is the phone line of Video
Server. After connecting successfully, start the Web browser and connect to
“http://200.1.1.1”. In this case, Video Server runs as a dial-up server and assigns the IP
address of “200.1.1.100” to the PC at the other end. While seeing the authentication
message window, type “root” as user name and the serial number of Video Server as the
initial password. The point-to-point connection allows users connecting Video Server for
surveillance at any time.
If the administrator has setup some conditions in the application Web page or the script
file, Video Server will automatically dial out based on the administrator's configuration.
Refer to the Application section in the Chapter Definitions of Configuration for special
security applications.
Summary of Contents for IPVS4
Page 1: ......
