Installation Instruction and User Guide
14
Click UP/DOWN button to switch to 4.- function menu
Click the SET button to enter LED off delay time setting
menu( Factory standard is set on 4.3
)
Long press SET button and enter menu interface 1.-
Example: using UP or DOWN to switch to 3.2 means
automatic closing at any location
►LED off delay time setting
For example
:
click UP/DOWN button to choose 4.9, it
means LED off delay time is 9*1min=9mins
Press SET button to confirm the set and it will back to
standby status
3.The closing condition is set on
as
standard in factory.
4.LED light flashes while the door is going to
close.
5.If the door controlled by remote or panel
during the closing process, the door will no longer
close automatically.
Note: In order to ensure the safety of use, the
automatic door closing function is recommended
to be used under the installation of infrared ray.
LED off delay time setting
a,Long press SET button till the display board
show
,
then press UP/DOWN to choose, till
display board show
(
LED OFF DELAY
TIME SETTING MENU
)
b,Press SET button to confirm and go to
sub-menu, then the display board show
c,Setting the LED OFF DELAY TIME grade
from
-to-
by press UP/DOWN
button.
Delay time: 1min*N
,
N=1-9.
The max. Delay time: 9mins.
d, Press SET button to confirm the set and it will
back to standby status.
Note
:
The LED off delay time is set on
as standard in factory, delay time is 3mins.
Summary of Contents for 4DR2
Page 2: ......