Installation Instruction and User Guide
13
Click UP/DOWN button to switch to 3.- function menu
Example: using UP or DOWN to switch to 3.2 means
automatic closing at any location
For example, UP or DOWN is used to adjust to 09, which
means the automatic closing time is 9*5S=45S
►Automatic closing time and condition setting
When the automatic closing time is selected, click SET again to save the
automatic closing time and enter the automatic closing condition setting
(default 3.1 means automatic closing only at the upper limit).
Click the SET button to enter the interface for setting the
automatic closing time (e.g., default 03 means the
automatic closing time is 3*5S=15S)
Long press SET button and enter menu interface 1.-
Automatic closing function time
NOTE
:
AUTO closing function switch is set by
AUTO Closing
a,Long press SET button till the display board
show
, then press UP or DOWN to choose,
till display board show
(
Automatic closing
function main menu
)
b,Press SET button to confirm and go to
sub-menu
,
then the display board show
c,Setting the AUTO closing time grade from
-to-
by press UP/DOWN button,5S
for each grade.
AUTO closing time = 5S*n, n=01—99.
The maximum closing time : 495S
d,Press SET button to confirm again then enter
the menu for AUTO closing condition setting,
display board show
. Press UP/DOWN
button to choose between
and
.
means, the door only can auto close
while in the open limit position and start
closing counting.
means, the door can auto close while the
door is in any position and start closing
counting.
e,Press SET button to confirm the set and it will
back to standby status.
Note
:
1.The auto closing time is set on
/15S as standard in factory.
2.If the Photo cell function is on, and it’s impeded
by the obstruction, the auto close time will stop
for a while, and then continue the automatic
close time again.
Summary of Contents for 4DR2
Page 2: ......