Installation Instruction and User Guide
9
AUTO Closing
：
auto closing setting
（
LED lights up to indicate mean the auto closing function
is opening
）
.
Force Margin
：
automatic reveres setting.
Quick function operation instruction
1
、
Open/close control (control panel)
：
Click UP button
（
open/stop
）、
click DOWN button
（
open/stop
）；
2
、
Menu Settings
：
Long press the SET button
；
3
、
Remote control code
：
Standby status click the CODE digital tube to display
Enter
the code checking state, press the same button of the remote control continuously for two or
three times, and then the two dots of the digital tube flash quickly and the polite light flashes,
which means the code checking is successful (the default remote control storage quantity is
50)
；
4
、
Clear code of remote control:
Standby state long press CODE, digital tube two small
points flash
，
Until the digital tube displays
，
all stored remote controls will be
deleted
；
5
、
Left/right installation Settings:
Press the L/R button for 6 seconds
，
release the button
after switching the status of L/R LED indicator
（
Note: in the garage from the inside out, to
distinguish the left and right direction, the default is right, each time the left and right
installation state, need to relearn the trip.
）
6
、
Automatic closing setting:
Click the AUTO Closing button to switch
（
The default LED light
off means that the automatic closing function is off, the LED light on means that the automatic
closing function is on, the default automatic closing time is 15 seconds
）；
7
、
Rebound setting:
Press the Force Margin button,the digital tube is displayed in
turn
...
choose the right gear for the nine - gear adjustment
（
The factory
default is L3, and the rebound value increases gradually from L1-- L9
）
;
8
、
Restore factory Settings:
Long press the RST key for 4 seconds and the digital tube will
scroll
and roller door opener will restart
（
The learned remote control is not
within the scope of factory reset).
Summary of Contents for 4DR2
Page 2: ......
