Installation Instruction and User Guide
10
13.FUNCTIONAL SPECIFICATIONS
Note:
before setting the stroke, please release the clutch and manually lift the door to the
middle position. Once again confirm whether the left/right side of the motor is installed correctly,
then lock the clutch, so as to prevent the door body from being damaged in the process of
setting the stroke due to the wrong installation setting of the left/right side of the motor or the
door body being in the upper/lower limit position.
►Motor stroke setting
Long press the SET button to enter the menu interface
1.-
Press SET to enter the upper limit setting interface
Function set limit learning
a:Long press the SET button until the digital tube
displays
b
:
Click SET again to confirm
,
enter limit learning
mode
,
digital tube displays
c:Press and hold the UP button until the digital
tube displays
up to open the door until it
reaches the desired position (click UP and DOWN
to fine-tune).
d:Press SET button to confirm and store the upper
limit of the door
,
then the digital tube
displays
press and hold DOWN button to
close the door and the digital tube will
display
down to close the door until it
reaches the desired position (click UP and DOWN
to fine-tune).
After determining the lower limit, press
SET button to confirm the closing position.After
the lower limit is determined, the door will
automatically return to standby display. The door
will open and close the cycle and run the full
stroke once. The force value data in the process of
running the door will be learned.
To this door body can operate normally.
Press UP to set the upper limit (click UP or DOWN to fine
tune UP and DOWN)
After the upper limit is set, click SET button to enter the
lower limit setting interface.
Press DOWN to set the lower limit(click UP or DOWN to
fine tune UP and Down.
After the lower limit is set, click the SET button to return to
the standby interface.
Summary of Contents for 4DR2
Page 2: ......