Namron Panelovn Zigbee Instruction Manual
Function introduction
Important:
Read All Instructions Prior to Installation
1. Product Data
Segment digital display
OK button
Radio Frequency
Operation Mode
Measurement range
Set Temperature Range
Hysterersis
Ambient Temperature
•
The Zigbee heating panel is a wireless heating device, which complies to Zigbee 3.0 wireless protocol
standards. The thermostat has 3 operation modes which can be controlled manually and locally or through
remote controlled through Zigbee gateway controller.
•
All setup is performed via supported IEEE 802.15.4-based control platforms and other Zigbee3.0 compatible
control systems.
•
Operation Modes: OFF, MANUAL,AUTO
•
Measurement range: 0°C to +60°C
•
WARNING: Electrical power must be switched off during installation
2.4GHz
OFF, MANUAL,AUTO
0°C to +60°C
5°C to 35°C
0.5°C to 2°C
0°C to 40°C (during operation)
Revised 04.01.2022
• DO NOT install with power applied to device.
• DO NOT expose the device to moisture.
Safety & Warnings
button
button
