User Manual
| VISIX PTZ Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
68
2)
Configuration > Advanced Configuration > Storage > Snapshot
3)
Check the
Enable Timing Snapshot
checkbox to enable continuous snapshot. Check the
Enable Event-‐triggered Snapshot
checkbox to check event-‐triggered snapshot.
4)
Select the quality of the snapshot.
5)
Set the time interval between two snapshots.
6)
Click
to save the settings.
UPLOADING TO FTP
NOTE:
Please make sure that the FTP server is online.
You can follow below configuration instructions to upload the snapshots to FTP.
!
Upload continuous snapshots to FTP
Steps:
1)
Configure the FTP settings and check
checkbox in FTP Settings
interface. Please refer to Section
6.3.8 Configuring FTP Settings
for more details to configure
FTP parameters.
2)
Check the
Enable Timing Snapshot
checkbox.
!
Upload event-‐triggered snapshots to FTP
Steps:
1)
Configure the FTP settings and check
checkbox in FTP Settings
interface. Please refer to Section
6.3.8 Configuring FTP Settings
for more details to configure
FTP parameters.
2)
Check
checkbox in Motion Detection Settings or Alarm Input interface.
Please refer to
Step
3
Set the Alarm Actions Taken for Motion Detection
in Section
6.6.1
Configuring Motion Detection
, or Step
4
Configuring External Alarm Input
in Section
6.6.1
Configuring Motion Detection
.
3)
Check the
Enable Event-‐triggered Snapshot
checkbox.