User Manual
| VISIX PTZ Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
29
Figure 6-‐2
Time Settings
CONFIGURING TIME SYNCHRONIZATION BY NTP SERVER
Steps:
1)
Check the radio button to enable the
NTP
function.
2)
Configure the following settings:
Server Address:
IP address of NTP server.
NTP Port:
Port of NTP server.
Interval:
The time interval between the two synchronizing actions by NTP server. It can be set
from 1 to 10080 minutes.
Figure 6-‐3
Time Sync by NTP Server
NOTE:
If the speed dome is connected to a public network, you should use a NTP server that has
a time synchronization function, such as the server at the National Time Center (IP Address:
210.72.145.44). If the speed dome is set in a customized network, NTP software can be used to
establish a NTP server for time synchronization.