User Manual|
VISIX Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
60
Figure 6-‐45
Audio Exception Configuration
CONFIGURING INTRUSION DETECTION
Intrusion detection can set an area in the surveillance scene and once the area is been entered, a set of
alarm action is triggered.
Steps:
1)
Check the
Enable Intrusion Detection
checkbox.
2)
Click
Draw Area
, and then draw a rectangle on the image as a defense region.
Note:
when you draw the rectangle, all lines should connect end to end to each other. Up to four
areas are supported.
Figure 6-‐46
Configuring Intrusion Area
You can click
Clear
to clear the areas you drawn. The defense region parameters can
be set separately.
3)
Choose the
region
to be configured.
a.
Threshold:
Range [0-‐10s], the threshold for the time of the object loitering in the region. If
you set the value as 0, alarm is triggered immediately after the object entering the region.