3Ware 3W-7410 - Escalade 7410 RAID Controller, Manual

Page: 45 / 126

How to maintain or verify a disk array
www.3ware.com 37
Figure 16. Delete Disk Array Display
Navigate to the Delete Array button and press Enter to bring up the Delete
Disk Array display. Check that the correct drives are listed.
Select the OK key to confirm deleting the array or Cancel to reject it. Recall
that the array is not actually deleted and no data will be overwritten until you
have finished making all your changes and selected the
F8 key.
How to maintain or verify a disk array
The Maintain Disk Array (see Figure 17) shows the current disk array con-
figuration that you have selected. The array’s Write Cache State can be
changed. Refer to Select write cache properties paragraph in the Creating a
disk array section . Verify Array can be specified as no or yes . The default is
no . Yes launches a foreground process that checks the data integrity of a fault
tolerant array. If the verify array process determines that the mirrored drives
are not identical or the parity is not correct, initialization of the array is
launched.
Restore Initial Values
Previous/Next
Toggle Hot Spare
Cancel
Select/Deselect
Done
Alt-F1
F6
Enter
F8
$
Esc
Help
3 w a r e D i s k A r r a y C o n f i g u r a t i o n
Create Array
Delete Array Maintain Array Rebuild Array
Available Drives:
Disk Arrays:
*Array Unit 0 - 4 drive 64K RAID 0 120.0GB
Port 0 - QUANTUM FIREBALLP LM30 30.0GB
Port 1 - QUANTUM FIREBALLP LM30 30.0GB
Port 2 - QUANTUM FIREBALLP LM30 30.0GB
Port 3 - QUANTUM FIREBALLP LM30 30.0GB