3M X31, Product Warranty And Safety Manual

Page: 16 / 162

‹0$OOULJKWVUHVHUYHG
Product Warranty and Safety Guide
ENGLISH
3M™ Digital Projector X31/X36/X46/WX36
OPEN
CLOSE
90°
OPEN
CLOSE
OPEN
CLOSE
OPEN
CLOSE
90°
OP EN
CLO SE
%DWWHU\FRYHU
Replacing the Internal Clock Battery
WARNING
‡ %HFDUHIXORIKDQGOLQJDEDWWHU\DVDEDWWHU\FDQFDXVHH[SORVLRQFUDFNLQJ
RUOHDNDJHZKLFKFRXOGUHVXOWLQD¿UHDQLQMXU\DQGHQYLURQPHQWSROOXWLRQ
8VHRQO\WKHVSHFL¿HGDQGSHUIHFWEDWWHU\'RQRWXVHDEDWWHU\ZLWKGDPDJH
VXFKDVDVFUDWFKDGHQWUXVWRUOHDNDJH
:KHQUHSODFLQJWKHEDWWHU\UHSODFHLWZLWKDQHZEDWWHU\
:KHQDEDWWHU\OHDNHGZLSHWKHOHDNDJHRXWZHOOZLWKDZDVWHFORWK,IWKHOHDNDJH
DGKHUHGWR\RXUERG\LPPHGLDWHO\ULQVHLWZHOOZLWKZDWHU:KHQDEDWWHU\OHDNHG
LQWKHEDWWHU\KROGHUUHSODFHWKHEDWWHULHVDIWHUZLSLQJWKHOHDNDJHRXW
0DNHVXUHWKHSOXVDQGPLQXVWHUPLQDOVDUHFRUUHFWO\DOLJQHGZKHQORDGLQJDEDWWHU\
'RQRWZRUNRQDEDWWHU\IRUH[DPSOHUHFKDUJLQJRUVROGHULQJ
.HHSDEDWWHU\LQDGDUNFRRODQGGU\SODFH1HYHUH[SRVHDEDWWHU\WRD¿UHRUZDWHU
.HHSDEDWWHU\DZD\IURPFKLOGUHQDQGSHWV%HFDUHIXOIRUWKHPQRWWRVZDOORZDEDWWHU\
,IVZDOORZHGFRQVXOWDSK\VLFLDQLPPHGLDWHO\IRUHPHUJHQF\WUHDWPHQW
2EH\WKHORFDOODZVRQGLVSRVLQJDEDWWHU\
¥
Note
7KHLQWHUQDOFORFNZLOOEHLQLWLDOL]HGE\UHPRYLQJWKHEDWWHU\)RUVHWWLQJWKHFORFNVHH³1HWZRUN
Guide”.
This projector has internal clock that uses a battery. When the clock of the network function does
not work correctly, please try solution by replacement of the battery:
HITACHI MAXELL,
part number
CR2032
or
CR2032H.
1. Turn the projector off, and unplug the power
FRUG$OORZWKHSURMHFWRUWRFRROVXI¿FLHQWO\
2. After making sure that the projector has cooled
adequately, slowly turn over the projector, so
that the bottom is facing.
3. Turn the battery cover fully in the direction
indicated “OPEN” using a coin or the like, and
pick the cover up to remove it.
4.
3U\XSWKHEDWWHU\XVLQJDÀDWKHDGVFUHZGULYHU
or the like to take it out. While prying it up, put
D¿QJHUOLJKWO\RQWKHEDWWHU\VLQFHLWPD\SRS
out of the holder.
5. Replace the battery with a new HITACHI
MAXELL
, Part No.
CR2032
or
CR2032H
.
Slide the battery in under the plastic claw, and
push it into the holder until it clicks.
6. Replace the battery cover in place, then turn it
in the direction indicated “CLOSE” using such
DVFRLQVWR¿[