3M W100, Manual

Page: 37 / 58

25
8-MAINTENANCE AND REPAIRS
(continued)
2011 October
WaterAct-M-S
8.23 Weighted Brush Cover
To Remove:
1. Remove the right side cover
(See Section 8.11).
2. Remove the water bottle.
3. Remove the cutter guard.
4. Remove the screws from the fl apper shaft
(Figure 8-34).
5. Slide the fl apper shaft, weighted brush cover,
tape weight, and bushings from the front
of the dispenser
(Figure 8-35).
6. Remove the screw from the tape weight and
remove the tape weight from the weighted
brush cover.
New Part Installation:
Reverse the removal procedure above.
8.24 Brush
To Remove:
1. Remove Water Bottle.
2. Remove Water Tank.
3. Remove Brush from Water Tank.
4. Place new brush in the tank with bristles
level with work area/ fl oor
(Figure 8-36).
5. Place tank and brush in water tank holder
.
6. Place the water bottle on bottle brackets with
post of water tank inserted into duckbill valve.
New Part Installation:
Reverse the removal procedure above.
Figure 8-34
Figure 8-35
Remove
Screw
Figure 8-36
Wrong Right
Brush Parallel
•
To reduce the risk associated with
pinch hazards:
−
Keep hands, hair, loose clothing, and
jewelry away from dispenser.
CAUTION