8
Information screen
Screen contents
Models SE and DL
Information screen
Every SoundPro SE/DL instrument describes its unique characteristics in its
Information screen. In the Start screen, press to select Unit Info, then
press . The Unit Info screen appears (Figure 1-5).
Figure 1-5: The Unit Information screen
Screen contents
The lines indicated in Figure 1-7 will contain the following information.
Line 1
- Model number showing, in order, the 3M designation (SE or DL), the
Class/Type (1 or 2) and the filter, if installed (1/1, 1/3 or blank).
Line 2
- Unique serial number assigned when the instrument was
manufactured.
Line 3
– The installed feature’s field lists any extra options (note: these may
be additionally purchased features as displayed above for Curves and STI-
PA.)
NOTE: It’s a good idea to record Information screen data in the event that
you need assistance and the instrument refuses to power up. For 3M
assistance, see “Contacting 3M” on page 149.
\UNIT INFO
SoundPro DL-1-1/3
Serial #
BIF120010
Revision
B 12M
Installed Features:
CURVES
STI-PA
1
2
3
Summary of Contents for SP-DL-1
