32
Logging
Setting logging options
Models SE and DL
Setting logging options
To set logging only options (Average, Peak, Maximum, Minimum)
Enabling or disabling logging options
1. Ensure you are at the start screen.
•
If turned on, repeatedly press
On/Off/Esc
until you return to the
start screen (see Figure 3-3 above).
•
To turn on, press and hold
On/Off/Esc
until the start screen
appears.
2. Press
Up/Down
to highlight
Setup
and then press
Enter .
3. Select
Logging
by
pressing
Up/Down
to highlight and then press
Enter
.
4. To change the
Logging
options for Meter 1 do the following:
a. Press
Up/Down
to highlight either
AVG
,
PEAK
,
MAX
,
MIN
.
b. Once the measurement is selected, press
Enter
button to
toggle between “
On
” or “
Off
”. Press
right/left
arrow to move back
to logging field.
NOTE: If you are setting Meter 2 options, ensure you are on Meter 2 by
pressing the Meter 1/Meter 2 softkey, and then repeat step 4a-b.
Figure 3-8: Logging screen explained
5. To change the
Exceedance Levels
on Meter 1, press
Up/Down
to
select either
L1
or
L2
Exceedance options
Set % by using the up/down
arrows.
•
L1
•
L5
Filters
•
On/Off setting
Logging Interval
•
Logging rate which can
be set at various
minutes and second
values
Logging options
On/Off setting
•
AVG (average)
•
Peak
•
MAX (maximum)
•
MIN (minimum)
Softkey: Meter 1/Meter 2
Summary of Contents for SP-DL-1
