3M Matic 7000a, Instructions And Parts List

Page: 43 / 170

31
2014 June
7000a-7000a3 Pro - NA
13.1 Safety Measures (see section 3)
Carrying out maintenance and repairs may imply
the necessity to work in dangerous situations.
13.2 Tools and Spare Parts Supplied with
the Machine
See Spare Parts Order Section.
13.3 Recommended Frequency of Inspection and Maintenance Operations
Operation Frequency Quali fication Sections
Inspection safety features daily 1 13.4
Cleaning of machine weekly 1 13.5
Cleaning of cutter blade weekly 2 13.6
Oiling of felt pad weekly 2 13.7
Lubrication monthly 2 13.7-13.8
Blade replacement when worn 2 See Manual 2 or 3
Drive belt replacement when worn 2 13.10
13.4 Inspections to be Performed Before and
After Every Maintenance Operation
Before every maintenance operation, Turn the main
switch OFF (O) and disconnect. During the mainte-
nance operation, only properly trained and quali
fi ed
personnel must work on the machine. At the end
of every maintenance operation check the safety
devices.
13-MAINTENANCE AND REPAIRS
13.5 Check Eff i ciency of Safety Features
1. Blade guard assembly upper taping head
2. Blade guard assembly lower taping head
3. Latching Emergency stop button with mechanical
lock (interrupt supply of electrical power)
4. Turn the main switch STOP/OFF (O)
5. Safety guards top drive belts
13.6 Cleaning of Machine
Qualif i cation 1
A weekly cleaning with dry rags or diluted detergents
is necessary. Cardboard boxes produce a signi
fi cant
quantity of dust and paper chips when processed
or handled in case sealing equipment. If this dust is
allowed to build up on machine components, it can
cause component wear and over-heating of drive mo-
tors. The dust build up is best removed from the ma-
chine with a vacuum cleaner. Depending on the num-
ber of cartons processed, this cleaning should be done
weekly. Excessive build-up that cannot be removed by
vacuuming should be removed with a damp cloth.
•
To reduce the risk associated with
mechanical and electrical hazards:
− Read, understand, and follow all safety
and operating instructions before
operating or servicing the case sealer.
− Allow only properly trained and quali fi ed
personnel to operate and service this
equipment.
•
To reduce the risk associated with
pinches, entanglement and hazardous
voltage:
− Turn electrical supply off and disconnect
before performing any adjustments,
maintenance or servicing the machine or
taping heads.
13.7 Cleaning of Cutter Blade
Qualif
i cation 2
Should tape adhesive build-up occur, carefully wipe
clean with oily cloth or brush
.
Oil prevents the build-
up of tape adhesive.
(See Manual 2 or 3)
WARNING