3M Matic 7000a, Instructions And Parts List

Page: 24 / 170

12
2014 June
7000a-7000a3 Pro - NA
4-SPECIFICATIONS
IMPORTANT SAFEGUARD
4.3 Operating Conditions
Use in dry, relatively clean environments at 5 o C to 50 o C [40 o F to 120 o F] with clean, dry boxes.
Note:
Machine should not be washed or subjected to conditions causing moisture condensation on
components.
4.4 Machine Noise Level:
Acoustic pressure measured at a distance of 1m. from machine with
Scotch PVC adhesive tape in operation; 78dB Acoustic radiation pressure at 1.6m. height with
Scotch PVC adhesive tape in operation; 73dB Measurement taken with appropriate instrument:
(Type SPYRI-MICROPHON 11).
4.5 Set-Up Recomendations:
• Machine must be level.
• Customer supplied optional infeed and exit conveyors (if used) should provide straight and level box entry/exit.
• Optional exit conveyor (powered or gravity) can help move sealed boxes away from machine.
•
To reduce the risk associated with f re
and explosion hazards:
− Do not operate this equipment in potentially
fl ammable or explosive environments.
4.1 Power Requirements:
Electrical – 120 VAC, 60 Hz, 6A
The machine is equipped with two 1/6 HP gearmotors and comes with an 2.4m [8 foot] standard neoprene
covered power cord and a grounded plug. Contact your 3M Representative for power requirements not listed
above. Contact your 3M Representative for power requirements not listed above.
4.2 Operating Rate:
Belt speed is 0.5m/s [100 F.P.M.]
Actual production rate is dependent on operator's dexterity. Boxes must be 18 inches (457mm) apart minimum.
WARNING