![background image](http://html1.mh-extra.com/html/3m/c1025/c1025_operating-instructions-manual_442894016.webp)
System Operation
Model
C1025
10
©
3M 2006
System operation includes turning on the base station and each transceiver
pack that will be used.
To turn on the base station:
1. Slide the power ON/OFF switch to/ the ON position. Check to see
that the POWER indicator lights.
2. Slide the VOLUME switch to the desired position (DAY or NIGHT).
To turn on the transceiver pack, press the ON switch located on the
transceiver pack. A single tone will sound in the headset to indicate the
unit has been turned on.
The system has several operating modes. The number of available
operating modes depends on the system configuration (
single-lane vs
dual-lane, standard communication vs duplex communication, etc.
).
In the standby mode, the transceiver pack is on and waiting to receive
communication from the customer or other headset operators. This mode
is available with all system configurations.
Use the talk/listen mode to talk to the customer. This mode is available
with all system configurations.
Single-Lane Standard
or
Duplex Communication Systems
1. A
single beep
alert tone sounds in the headset at 2-second intervals
when the system detects a customer (vehicle) at the menu sign.
2. When you hear the alert tone, press and hold T1
or
T2 to talk to the
customer at the menu sign. Release T1
or
T2 to listen.
Dual-Lane Standard
or
Duplex Communication Systems
In dual-lane systems, some transceiver packs are programmed to
communicate with Lane 1 and others are programmed to communicate
with Lane 2.
1. An alert tone sounds in the headset when the system detects a
customer (vehicle) at the menu sign:
•
The alert tone for the Lane 1 headset is a single beep that repeats at
2-second intervals.
•
The alert tone for the Lane 2 headset is a double beep that repeats
at 2-second intervals.
2. When you hear the
single beep
alert tone, press and hold T1 and talk
to the customer. Release T1 to listen.
When you hear the
double beep
alert tone, press and hold T2 to talk to
the customer. Release T2 to listen.
System Operation
Turning On the Base
Station
Turning On the
Transceiver Pack
Operating Modes
Standby Mode
Talk/Listen Mode