Controls and Indicators
Model C1025
4
©3M 2006
The controls on the transceiver pack are shown below.
Figure 5. Headset and Transceiver Pack Controls
Press and hold the PAGE switch to talk to internal personnel without being
heard by the customer. Release the switch to listen.
Press the volume
down control to decrease the volume.
When either volume control is pressed, the headset emits a short tone to
indicate the new volume level. There are 15 different volume levels from
minimum to maximum.
If the headset volume is at its maximum level, a low, continuous tone
sounds when the volume up
control is pressed. A low, continuous tone
also occurs when the volume reaches minimum level and the volume
down
control is pressed.
Note that even when set to its lowest level, headset volume is not turned
completely off.
Press the volume up
control to increase the volume in the headset.
Press the ON switch to turn on the transceiver pack.
Press the OFF switch to turn off the transceiver pack.
For duplex systems where hands free operation is desired, press the talk
lock switch once to talk and listen to the customer. This enables hands-free
operation
Headset and
Transceiver Pack
1 PAGE Switch
2 Volume Down
Control
3 Volume Up
Control
4 ON Switch
5 OFF Switch
6 Talk Lock Switch
(Hand Free)
