3D Universe Presents: The Unofficial FlashForge Creator X Manual
shop3duniverse.com
Page 29 of 43
800-‐689-‐4344
Now click
Merge
. Two windows will then pop up.
In both windows you need to remove the tick in front of the 'use raft/support' option. Make
sure the rest of your settings are the same in both boxes, then click the Generate Gcode button
in both windows.
Once your Gcode is generated, click the left most button on the green bar near the top of the
screen to start the print.
The Gcode has now been sent to the printer and the object will start printing shortly.
