3D Universe Presents: The Unofficial FlashForge Creator X Manual
shop3duniverse.com
Page 14 of 43
800-‐689-‐4344
Click ‘Close’ on the Preferences menu and you are done!
Importing an STL File and Generating Gcode
The following gives an overview of how to import .STL files into the Replicator G software and
then generate Gcode to print your creation.
Click
File > Open
, then browse and select the .STL file that you would like to print, import the
file by double-‐clicking. Then the drawing will appear on the Replicator G interface.
When the object is imported you may find that it is not on the virtual build platform or even on
the screen. Using the function keys indicated by the red boxes, you can change the camera
angle and reposition the object onto the center of the build platform. Once you've done this,
