3D Universe Presents: The Unofficial FlashForge Creator X Manual
shop3duniverse.com
Page 13 of 43
800-‐689-‐4344
Using Replicator G with the FlashForge Creator X
Downloading and Installing Replicator G
ReplicatorG0040 is the software recommended by FlashForge for the Creator X. For additional
software options, please refer to the remainder of this section.
ReplicatorG0040 for Windows can also be found on the SD card included with your Creator X, in
a folder called “Information of 3D printer”.
Steps for installing and configuring your software:
1.
Download
and
install
the
appropriate
version
of
PyPy
from
http://pypy.org/download.html
2.
Download and install the appropriate version of Replicator G suitable for your system
from
http://replicat.org/download
.
a.
During the installation, if you receive a message saying that a Python interpreter
was not found, ignore it and press
Install
to continue.
3.
To run the Replicator G software, double click the shortcut on your desktop or in your
start menu.
4.
Click
File > Preferences
, then click
Select Python interpreter
on the Advanced tab. A
window will pop up, navigate to the PyPy installation directory and select pypy.exe and
click ‘Open’.
