3Dlabs P Class 450/500/550/600/650/700/750 User Manual Download Page 21 | Manualshive

Page: 21 / 59

background image

SOFTWARE CONFIGURATION

Removing an existing driver under Windows NT

1. Log on to Windows NT using an account with administrative privileges. Please consult your

system administrator or Microsoft Windows NT User's Manual for more information on
Administrator privileges.

2. From the operating system Start menu, go to Settings/Control Panel and double-click

Add/Remove Programs.

3. On the Add/Remove Programs Properties Install/Uninstall tab, highlight the Display Driver you

are removing and click Add/Remove.

4. Click Yes when prompted to confirm the driver removal, and follow the prompts. Reboot the

system before installing the new Wildcat III 6210 or Wildcat III 6110 driver.

Removing an existing driver under Windows 2000

1. Log on to Windows 2000 using an account that has administrative privileges. Please consult your

system administrator or Microsoft Windows 2000 User's Manual for more information on
Administrator privileges.

2. From the Start menu, go to Settings/Control Panel and click Add/Remove Programs.
3. Under Change or Remove Programs, highlight the current Display Driver and click

Change/Remove.

4. Click Yes when prompted to confirm the driver removal, and follow the prompts to complete the

driver removal.

5. Click OK when notified that the driver removal is complete and reboot your system before

installing the new Wildcat III 6210 or Wildcat III 6110 driver.

Removing an existing driver under Windows XP

1. Log on to Windows XP using an account that has administrative privileges. Please consult your

system administrator or Windows XP User's Manual for more information on Administrator
privileges.

2. From the Start menu, go to Control Panel.
3. Under Change or Remove Programs, highlight the current Display Driver and click

Change/Remove.

4. Click Yes when prompted to confirm the driver removal.
5. Click OK when notified you must reboot your system for driver removal to occur and reboot your

system before installing the new Wildcat III 6210 or Wildcat III 6110 driver.

3Dlabs Graphics Accelerator Card User's Guide

15

«
...
19
20
21
22
23
...
»

Summary of Contents for P Class 450/500/550/600/650/700/750




























































Reviews:

No comments

Related manuals for P Class 450/500/550/600/650/700/750

Radeon X1650PRO

Brand: Diamond Multimedia Pages: 1

Brand: Barco Pages: 2

Brand: Hyundai Pages: 135

Brand: DAQ system Pages: 21

Brand: Gigabyte Pages: 39

Brand: Diamond Systems Pages: 8

Honda CS-CRV12 CRV

Brand: Car Show Pages: 14

Brand: Phonocar Pages: 8

Brand: ZyXEL Communications Pages: 1

Brand: VideoLogic Pages: 15

Brand: Xomax Pages: 35

Brand: JGC Pages: 52

GEFORCE GTX 680 PHANTOM

Brand: Gainward Pages: 2

Brand: Car Solutions Pages: 11

Brand: Valve Pages: 18

Brand: Abit Pages: 64

Brand: ICOP Technology Pages: 38

Brand: Magma Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands