TMA Grand Master 2.6 – User’s Guide
5 Using TMA Grand Master
NOTE:
If an additional filter is added, the previously set filter setting will be inactive and cannot be
modified.
5.10 Batch removal of blocks
When you close a project, the software offers you the option “Batch out” through which it is
available for you to remove all the blocks (donor and recipient) from the device in one session.
After clicking
Yes
, first open the door, remove blocks, then close the door. Once the door is closed,
and the drum turns to the next tray position, repeat procedure until all the blocks have been taken
out from the device. If all the blocks have been removed, the software closes the project. If you want
to close the project sooner, click
Exit
.
December 9, 2016 – Rev. 1
3DHISTECH Ltd.
72(92)
