TMA Grand Master 2.6 – User’s Guide
5 Using TMA Grand Master
Important!
The table below shows the maximum number of holes can be drilled into a paraffin
block depending on hole sizes:
Paraffin Block Size (mm)
Hole Sizes (mm)
Max. No. of Holes
Color of Drill Bit
37×24
Ø 0.6
16×31 =
558
N/A
Ø 1.0
13×22 =
286
black
Ø 1.5
9×15 =
135
magenta
Ø 2.0
7×12 =
84
blue
The selected layout scheme with layout labeling (if selected) is applied on the recipient block image.
The icon of the filling direction is presented at the top left corner of the recipient block panel. For
more information on layout labeling, see section
5.11 Settings – Layout
.
5.2.2 Modifying a recipient block layout
1. Open
Layout Editor
window by clicking the button next to the recipient block image.
2. To modify a block layout, select the name of the desired layout from the drop-down list, then
click
Edit
.
3. Follow steps 3-8 in section
5.2.1 Creating a recipient block layout
.
4. Click
Save
.
5. If you do not wish to modify further layouts, close window and apply the actual layout for the
recipient block by clicking the arrow at the right side of the panel.
December 9, 2016 – Rev. 1
3DHISTECH Ltd.
42(92)
