TMA Grand Master 2.6 – User’s Guide
5 Using TMA Grand Master
5.2.3 Deleting a recipient block layout
If you wish to delete the layout for the selected block, click next to the block image
OR
•
Open either the
Layout Editor
window.
•
Select the layout you want to delete from the drop-down menu and click
Delete
.
NOTE:
You cannot delete a layout if it has already been used in a TMA project.
•
If you do not wish to delete further layouts, click
Exit
to close the window.
5.3 Inserting Recipient Blocks
1. Switch on the TMA Grand Master main unit, the control computer and the monitor, and
start the TMA Control application on the control computer.
2. Insert recipient blocks into the main unit as explained in section
4.4.3 Inserting a block into
the main unit
.
3. In the classic view of the recipient block panel, block thumbnail images are refreshed each
time after you have inserted a block into a slot.
•
First, click the block thumbnail, then type in a
block ID, or add a layout.
•
In the new view for recipient blocks, the
following options are available for you to
choose from after the block thumbnail image
is displayed in the
Unused Block(s)
panel:
•
Click the block image then type in the ID, add
a layout.
•
The block will be moved to the
Recipient
Block(s)
panel if you tick the selection box at
the top right corner of the thumbnail image,
or if you mark a core on a donor block to be
transferred to this recipient block.
•
Click to mark block as cleaning block, then it
is moved to the
Cleaning Block(s)
panel.
•
Click then the tray into which the block
has been loaded will be rotated to the
unloading position.
December 9, 2016 – Rev. 1
3DHISTECH Ltd.
43(92)
