3DHISTECH TMA Grand Master 2.6 User Manual Download Page 16

Page: 16 / 92

TMA Grand Master 2.6 – User’s Guide

3 Installation of TMA Control Software

3 Installation of TMA Control Software

3.1 Prerequisites for the TMA Control Software Installation

Prerequisites

Description

Hardware

Recommended

Intel® Core™ i5-4570 Quad-Core, 3.2 GHz, 4GB RAM

Monitor Screen resolution

Recommended:

UXGA (1680×1050 or 1920×1080 True Color) or better at 96 Dpi

Operating system

Microsoft Windows 7 Professional 64-bit SP1 EN or Microsoft Windows 10
Professional 64-bit EN

Disk space

Recommended:

3GB – for application software, drivers, prerequisite and temporary files
500 GB – for saving the TMA database, and for storing digital slides

3.2 TMA Control Software Installation

Important!

3DHISTECH service technicians perform the installation and configuration of the

TMA

Control

software.

The following installation procedure is for information purposes only – follow the

below steps only if you need to re-install the software, or upgrade to a newer
software version.

Warning!

The control PC on which the SW application of TMA system runs, shall not be

considered as general purpose personal computer.

In order to achieve error-free operation, 3DHISTECH Ltd. prohibit the modification

of the PC configuration as well as the installation of any additional software.

Any action that is prohibited by this manual can cause malfunction of the system

that 3DHISTECH Ltd. is not responsible for.

December 9, 2016 – Rev. 1

3DHISTECH Ltd.

16(92)

Summary of Contents for TMA Grand Master 2.6





























































































Search results

Summary of Contents for TMA Grand Master 2.6

Reviews:

Brands by name

Popular brands

3DHISTECH TMA Grand Master 2.6, User Manual

Search results

Summary of Contents for TMA Grand Master 2.6

Reviews:

Brands by name

Popular brands