3DHISTECH PANNORAMIC DESK FLASH DX Page 5 Instructions For Use Manual Download | Manualshive

Page: 5 / 72

background image

PANNORAMIC® DESK FLASH DX

ABOUT THESE INSTRUCTION FOR USE

4

INFORMATION FOR USE

–

FOR INVESTIGATIONAL USE ONLY.

THE PERFORMANCE CHARACTERISTICS OF THIS PRODUCT HAVE NOT BEEN ESTABLISHED.

Disclaimer

Copyright © 2001

-2020 3DHISTECH Ltd.

All rights reserved.

Intellectual property related to the 3DHISTECH products are as follows:

•

P1300124; PCT/HU2014/000020; EP 14745228.8.; US 14/771.380

•

P0700404; PCT/HU2008/000065; EP 08762668.5.; US 12/663.537

•

P1700279; PCT/HU2018/050030

•

P1700483

•

P1500394; PCT/HU2016/050039; EP 16840280.8.; US 15/756.370

•

P0700409; US 2008/0306964

•

P0800181; PCT/HU2009/000027; EP 09721248.4.

•

P0600435; PCT/HU2007/000047; EP 2024772; US 12/301.781

•

P0600177; PCT/HU2007/000018; EP 1.994.398; US 12/281.566

•

P0900741; PCT/HU2010/000130; EP 10812989.1.

•

P0900142; PCT/HU2010/000027; EP 10726183.6

•

P101036; PCT/IB2005/050351; EP 1789831; US 7.663.078

•

P0301911; PCT/HU04/00019; EP 1644767; US 7327515

The above-mentioned granted patents, granted utility model, registered trademarks, pending
international and national patent applications and the other corresponding IP are the sole
properties of the 3DHISTECH Ltd.

3DHISTECH Ltd. is not liable for damage of whatever nature (including, but not limited to,
general or specific damage, indirect damage, consequential damage or incidental damage,
including the results of the analysis of the digitized slides, for example, change of health status
related to erroneous diagnosis from the digitized slide(s)) that stems from or is associated with
use of Product, digitized slides, quality of staining, quality of stained slides, quality of used
method of staining. 3DHISTECH Ltd. assumes no responsibility for the functionality and fault-

free condition of your “application programs” (Workflows, VBA macro

s, Commander scripts).

CAUTION

The performance evaluation is pending for the Pannoramic

®

Pathology Management System.

This product has not been approved or cleared as a medical device by the U.S. Food and Drug
Administration.

Do not use this device in close proximity to sources of strong electromagnetic radiation (e.g.
unshielded intentional RF sources), as these may interfere with the proper operation.

«
...
3
4
5
6
7
...
»

Summary of Contents for PANNORAMIC DESK FLASH DX









































































Reviews:

No comments

Related manuals for PANNORAMIC DESK FLASH DX

Brand: Radio Shack Pages: 88

Brand: THORLABS Pages: 40

9080C - DR - Document Scanner

Brand: Canon Pages: 16

500F - CanoScan LiDE

Brand: Canon Pages: 22

Brand: Canon Pages: 2

Brand: Canon Pages: 60

Brand: Canon Pages: 39

5000F - CanoScan Scanner

Brand: Canon Pages: 2

Brand: Canon Pages: 6

CanoScan FS2720U

Brand: Canon Pages: 30

Brand: Canon Pages: 96

Brand: Canon Pages: 19

9871A001 - CanoScan LiDE 35 Scanner

Brand: Canon Pages: 14

CanoScan 5200 F

Brand: Canon Pages: 18

Brand: Canon Pages: 19

Brand: Canon Pages: 109

CanoScan LiDE 80

Brand: Canon Pages: 20

4200F - CanoScan Flatbed Scanner

Brand: Canon Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands