Page
38
of
44
3DGence Material Management System | version 1 | 03.2022
Each chamber in the device is capable of carrying out a regeneration cycle; however, to reduce energy consumption it is
recommended that the process be carried out for all cartridges in the same chamber.
To start the desiccant cartridge regeneration cycle, go to the process wizard screen and select DRYING AGENT REGENERATION,
follow the on-screen instructions, and then press the START button.
Fig. 46 Screens demonstrating the activation of the regeneration process of desiccant cartridges
To cancel the regeneration process of desiccant cartridges, press on the chamber area during the process. After pressing the
chamber area, confirm your intention to cancel the process by pressing the ABORT button. To reset the chamber status to
empty, press the chamber area.
Fig. 47 Screens demonstrating the process of cancelling the regeneration of desiccant cartridges
6.
USER DEFINED PROCESS (optional)
In the extended version of the 3DGence Material Management System, which is configured accordingly at the production stage,
it is possible for the user to define the basic parameters of the device cycle himself. The parameters that the user can define
are as follows:
•
Cycle temperature: between 50°C and 200°C.
•
Cycle time: from 1 minute to 99 hours and 59 minutes.
•
Storage temperatu
re after the process: between 50°C and 80°C
