3DBNZ ATLAS 4030 User Manual Download Page 29

Page: 29 / 32

ASSISTANCE SERVICE

If you do not find a solution to your problem in this manual, please

contact the 3DBNZ team through any of the following channels:

FORUM

We recommend that you visit our forum before taking any other

action. It is very likely that another user has had the same problem

as you, and the forum is where most of them are solved.

3dbnz.com/forums/

TECHNICAL ASSISTANCE

You can contact the technical assistance services by

email, and we will answer you as quickly as possible.

Please remember to include your phone number

[email protected]

EMAIL

If you have a question that is not related to technical

assistance, please send us an email to the address

below. A 3DBNZ expert will contact you as quickly as possible.

[email protected]

You can find all of this information in the Contact

Section of our website:

3dbnz.com/contact/

Be sure to include the serial number of your computer machine you

send us a query to help us provide the best possible services.

ATLAS SERIES

Assistance Service

RETURNS POLICY

Returns will only accepted for products that have not been used within a period of 14 business days,

starting from when the printer was delivered. Once this period has expired, all sales with be considered to be final. “Not used” is

understood to mean products that have never been assembled, switched on, programmed or altered in any other way

TERMS AND CONDITIONS OF SERVICE

The information in this manual is subject to change at any time without notice, and is provided solely for informational purposes. 3DBNZ

reserves the right to change or modify the manual at any time at its sole discretion, and you agree to be bound by any such changes and/

or modifications.

If you would like to get the most up-to-date information, please contact 3DBNZ technical team or visit the www.3dbnz.com website.

The design of this manual and all the text, graphics, information, content and other materials are protected by copyright and other laws.

Some of the trademarks, trade names, service marks and logotypes (the “Trademarks”) used are registered and unregistered trademarks,

trade names and services marks that are the property of 3DBNZ and its partners. Nothing contained in this manual grants or should be

construed as granting, by implication, estoppel, or otherwise, any license or right to use any Trademark without the written permission

of 3DBNZ. Any unauthorised use of the information, materials or trademarks may breach the laws regulating copyright, registered

trademarks, privacy and publicity and/or other laws and regulations.

Summary of Contents for ATLAS 4030

































Search results

Summary of Contents for ATLAS 4030

Reviews:

Related manuals for ATLAS 4030

Brands by name

Popular brands

3DBNZ ATLAS 4030, User Manual

Search results

Summary of Contents for ATLAS 4030

Reviews:

Related manuals for ATLAS 4030

Brands by name

Popular brands