3DBNZ ATLAS 4030, User Manual

Page: 23 / 32

BASIC SLICING PARAMETERS
Below the base setting you can use as a starting point to create your own profiles
Parameter value
Filament Diameter 1.75 mm
Extruder Diameter 0.4 mm
Extrusion Multiplier 1
Layer Height 0.18 mm
Top Solid Layers 5
Bottom Solid Layers 5
Perimeter Outlines 2
First Layer Height Percentage 105 %
First Layer Width Percentage 105 %
First Layer Underspeed 40 %
Skirt Layers 1
Skirt Outlines 5
Retraction Amount 2 mm
Retraction Vertical Lift ( Z hop ) 1 - 2 mm
Retraction Speed 7200
Outline Overlap Percentage 40 %
Infill Percentage 30 %
Infill Extrusion Width Percentage 105 %
Speed 3000
Rapid Speed 6000
Acceleration 2000
START GCODE
make sure your slicing software has the following commands in the
start routine:
G28 ; HOME
G92 E0 ; reset extruder lenght,
G0 Z20 F6000 ; approach the build plate
END GCODE
make sure your slicing software has the following commands in the
end routine:
G28 ; HOME
M104 S0 ; turn off extruder
M140 S0 ; turn off bed
M107 ; turn off layer fan
ATLAS SERIES
23
Preparing files for Use