3D
Aeroventures
N�v�r S�o� E�p�o�i�g� N�v�r S�o� Q�e�t�o�i�g� N�v�r S�o� P�a�i�g
- 5� -
8.2.4 Finally, install a 6S or 5S battery size in a location that will properly balance
the aircraft. A 6S is recommended for the heavier PLA, ABS/ASA, or PETG
version, while a 5S will sufficiently power the LW-PLA Hybrid version.
Balance the aircraft along the recommended Center of Gravity position.
The Center of Gravity position for the aircraft is located between
75mm - 85mm behind the leading edge of the wing, as shown in the image
below. Remember to err on the side of slightly nose heavy for your first
flight and adjust from there.
8.2.5 Once you are happy with where the battery is located for balancing, attach
a long strip of velcro with adhesive backing to the fuselage tray and the
battery, and use two velcro straps to hold the batter in place during flight.
Step-by-Step Build Guide (cont’d)
CG Location 75 - 85mm
behind the Wing’s
Leading Edge
75 - 85mm
