![3DAeroventures Super Chipmunk Build Manual Download Page 47](http://html1.mh-extra.com/html/3daeroventures/super-chipmunk/super-chipmunk_build-manual_442111047.webp)
3D
Aeroventures
N�v�r S�o� E�p�o�i�g� N�v�r S�o� Q�e�t�o�i�g� N�v�r S�o� P�a�i�g
- 4� -
Step-by-Step Build Guide (cont’d)
Step 7.3 Install Control Surfaces and Hinges
7.3.1 Attach the Right Aileron to the Right Wing by routing the
1mm - 1.5mm
O.D. x 650mm long carbon fiber rod through the hinge holes in the wing
and aileron. The carbon fiber rod can be inserted through either the
wingtip or the wing root. Alternatively, If you have trouble finding a
650mm long carbon fiber rod you can use qty. 2, 325mm long rods. Insert
one rod through the wingtip and one through in the wing root until they
meet in the middle. Place a drop of CA glue in the rod entry holes to
prevent the rod from sliding out.
7.3.2 Repeat step 7.3.1 to attach the Left Aileron to the Left Wing