3D
Aeroventures
N�v�r S�o� E�p�o�i�g� N�v�r S�o� Q�e�t�o�i�g� N�v�r S�o� P�a�i�g
- 4� -
Step-by-Step Build Guide (cont’d)
Step 7.2 Install Motor Mount
7.2.1 Choose one of the included motor mount options that will work for one of
the recommended motors. If you are using a different motor than what is
recommended, make sure the hole spacing dimension on the X-mount
pattern matches the dimension shown in the image below.
7.2.1 Screw the Motor Mount onto the fuselage firewall using qty. 4, M4 x 0.7mm
Thread x 16mm Long Screws.
ATTENTION: The motor mount is designed with a few degrees of right thrust
and down thrust angles and must be mounted in the proper orientation.
Make sure the arrow that is on the face of the motor mount is facing up.
Ensure the arrow on the face of the
motor mount is facing up when mounted.
Hole Spacing = 58mm
