3D
Aeroventures
N�v�r S�o� E�p�o�i�g� N�v�r S�o� Q�e�t�o�i�g� N�v�r S�o� P�a�i�g
- 3� -
Step-by-Step Build Guide (cont’d)
Step 7.1 Install Servos
7.1.1 Using the mounting screws that came
with your servos, mount the rudder
and elevator servos in the fuselage
servo tray.
Note: It is recommended to test and
center the servos prior to installation.
7.1.2 Install the servo control arms and
attach the control rods using the
control rod connectors.
Step 7. Final Radio and Motor Installation
Tools and Materials Needed:
- Screwdriver for servo mounting screws and servo control horn
- Allen wrench for control rod connectors
- Needle nose pliers
- Velcro strips with adhesive backing
Hardware/Electronics Needed (links to recommended hardware on pg 4):
- 0.8mm - 1.2mm steel wire for aileron servo control rods
- Servo control rod connectors (x2)
- Motor: EMAX MT1806 - 2280KV
- ESC: 12A - 20A Esc
- Rec. Prop: APC 4.75x4.75 Electric Pusher
- Battery: 2S 650mAh LiPo or 3S 450 - 650 mAh
- Radio: Radio + 5 Channel Reciever
- Servos: EMAX ES9251ii (2.5g) Digital Servo or equivalent 18.02x7.91x16.8mm size servo (x4)
