Horiz Stab L (2g)
Vert Stab (2g)
Step-by-Step Build Guide (cont’d)
3D
Aeroventures
N�v�r S�o� E�p�o�i�g� N�v�r S�o� Q�e�t�o�i�g� N�v�r S�o� P�a�i�g
- 1� -
2.3.3 Using a hot knife, follow the molded
in line/guide to cut away the sacrificial
support located in the front of the
fuselage.
2.3.5 Glue parts Vert Stab, Horiz Stab R, and Horiz Stab L using CA glue. Ensure
the Vert Stab is as close to vertical as possible, and the Horiz Stab is as
perpendicular as possible before spraying the joints with accelerator.
Horiz Stab L (2g)
Vert Stab (2g)
Horiz Stab R (2g)
2.3.4 Prior to gluing the Stab parts on the fuselage you may want to drill out
the holes for the hinge rod. We used a 1mm hinge rod so we drilled out
with a 1.2mm drill bit.
