Step 2.1 Cut 3mm O.D. Carbon Fiber Tubes to Length
When printing with LW-PLA you will likely have some residual stringing. Inspect
all of the printed parts for stringing and use sand paper, a small file or a hobby
knife to eliminate the stringing, especially in areas where parts will mate. You
will find most of the stringing comes off quite easily.
Step 2.2 Cut or Sand Away Any Stringing
3D
Aeroventures
N�v�r S�o� E�p�o�i�g� N�v�r S�o� Q�e�t�o�i�g� N�v�r S�o� P�a�i�g
- 1� -
Step-by-Step Build Guide (cont’d)
Using a rotary tool (Dremel), miter saw, or hand saw, cut your 3mm carbon fiber
fuselage tubes and dowel pins to the proper lengths. You will need:
Qty. 2
190mm long
Qty. 2
10mm long
