3D
Aeroventures
N�v�r S�o� E�p�o�i�g� N�v�r S�o� Q�e�t�o�i�g� N�v�r S�o� P�a�i�g
- 1� -
Step-by-Step Build Guide (cont’d)
Step 3. Wing + Aileron Assembly
Tools and Materials Needed:
- Medium Bodied CA/Super Glue
- Accelerator for CA
- Sandpaper and/or Small Files
Printed Parts Needed:
3.1.1 Prior to gluing the parts together you may need to clear out the hinge holes with a
small drill bit. Glue parts Wing R1 and Wing R2 together using CA glue. Spray
accelerator on the joint to speed curing of the CA glue. The built in alingment tabs
will keep all parts well aligned.
Step 3.1 Glue The Wing Parts Together
Wing L1 (8g)
Wing R1 (8g)
Aileron Servo Tray(PLA) (x2)
Aileron R1 (2g)
Motor Pod Lid (PLA, PETG, ABS)
Motor Pod (PLA, PETG, ABS)
Aileron R2 (2g)
Aileron L2 (2g)
Aileron L1 (2g)
Wing L2 (7g)
Wing R2 (7g)
(5g Total)
Hardware Needed (links to recommended hardware on pg 4):
- 3mm O.D. (or 1/8” O.D) x 10mm Long Dowel Pins (cut from leftover carbon tube/rod) (x2)
- 1mm O.D. x 300mm Long O.D. Carbon fiber rod or Steel Wire (x2) for Aileron Hinge
