q u i c k s t a r t g u i d e
s a f e t y
54
Safety
General
Always follow the safety procedures. Do not, in any way, risk injury by working dangerously.
Safety is a part of work, and not an obstacle to it.
Laser Safety
The Viper Pro is a Class I Laser Device by the Center for Devices and Radiological Health
(CDRH). Class I devices are not considered harmful and require no special safety precautions. In
normal operation, the laser beam is completely confined and the viewing windows in the Process
Module block UV radiation.
Control Switches
The locations of control switches are described in the chapter,
SLA System Hardware
. Master and
Emergency power shut-off switches are located as
described in the following sections.
Master Power Shut-off
The Viper Pro has a master circuit breaker switch located on the back of the power input module.
Emergency Shut-off
The Viper Pro has an Emergency Shut-off button on the front panel of the Control Module/Bay in
each build chamber and in the optics compartment.
Summary of Contents for Viper Pro SLA iPro 8000
Page 2: ...q u i c k s t a r t g u i d e 2 Customer Support 78 Legal Notices 79 ...
Page 12: ...q u i c k s t a r t g u i d e q u i c k s y s t e m o v e r v i e w 12 ...
Page 13: ...q u i c k s t a r t g u i d e q u i c k s y s t e m o v e r v i e w 13 ...
Page 14: ...q u i c k s t a r t g u i d e q u i c k s y s t e m o v e r v i e w 14 ...
