3D Systems Fiure 4 Standalone, Manual, Page: 40 / 120

8/12/22, 2:53 PM Руководство пользователя
ru.infocenter.3dsystems.com/figure4jewelry/print/book/export/html/526 40/120
Активация принтера
You can activate your printer by going to support.3dsystems.com/ gure4jewelry and clicking the Printer
Activation link.
ВНИМАНИЕ ! Крайне важно зарегистрировать принтер , чтобы активировать гарантию на обслуживание .
Connect Printer to WiFi with Router
While the printer does not have embedded WiFi, you can connect the printer to WiFi via third-party products. 3D Systems recommends the TP
Link Travel Router . This procedure will explain how to set up your printer with this WiFi solution. You may need to consult with your network
administrator for assistance.
NOTE: 3D Systems does NOT provide technical support for the TP Link Travel Router. If experiencing issues, contact the manufacturer
here:
https://www.tp-link.com/us/support/ . Also, the following page lists many helpful troubleshooting
steps: https://windowsreport.com/wi- -repeater-wont-connect/ .
1. Set the switch on the side of the router to AP/Rng Ext/Client.
2. Connect your computer to the TP Link Travel Router via Ethernet (preferred) or WiFi:
a. Connect your computer, tablet, or smartphone to the router's WiFi. The network name is printed on
the product label on the back of the router.
b. In a browser, go to http://tplinkwi .net/ . The username is "admin". The password is "admin".
3. Go to Quick setup and click Next .
4. Under Operation Mode , select Client . Click Next .
5. Under AP List , select Connect on the WiFi network to which you wish to connect.
. Enter the password for the selected network anc click Next .
7. Under Network Settings , click Next .
. Under Review Settings , click Finish .