8/12/22, 2:53 PM
Руководство пользователя
ru.infocenter.3dsystems.com/figure4jewelry/print/book/export/html/526
33/120
A method of removing the crate from the shipper’s truck
, such as a pallet jack or forklift, and is available to transfer the crate(s) to
the uncrating location.
For removing the printer from its crate, you have another person available to help
. For transporting the uncrated printer within your facility,
you have the help of another person or hand truck.
Your receiving area, hallways, and 3D-printing room have the
necessary doorway/passageway clearance
to move either crated or uncrated
components of the Figure 4 Jewelry system.
You have set up
, as well as arranged for a company to dispose of your hazardous waste according to all government
regulations.
You have purchased any desired
third-party supplies and equipment
.
Network Information
Enough Cat-5e/Cat-6 Ethernet outlets have been installed to accommodate the number of printers you have ordered.
If Figure 4 Jewelry system will use 3D Connect™, an internet connection via gateway/NAT, using port 443 with encrypted connections is available.
Post-Processing Equipment
Final installation site is selected. The intended physical location of your post-processing equipment should be selected in advance, and checked for
adherence to the
guidelines set out in this guide
For the LC-3DPrint Box: A surge-protected circuit with space for a 1.3A (2.6A USA) machine is available.
If purchasing an ultrasonic cleaner, it is rated for use with ammable solvents like IPA (isopropyl alcohol). Larger ultrasonic cleaners may require a
dedicated circuit and/or power outlet. Check with your ultrasonic cleaner supplier.
If desired/required, you have purchased enough uninterrupted power supplies (UPS) for your post-curing units and ultrasonic cleaners.
If desired/required, fume hoods have been installed in your part-cleaning/curing areas.
Before the printer is installed into this facility, we acknowledge that the installation site complies with the speci cations stated in the Figure 4
Jewelry Facility Requirements Guide. Once the printer is installed, we agree not to alter any of the required speci cations listed in this
manual without consulting with a 3D Systems’ Customer Service Representative or certi ed partner. If alterations are made without consulting
3D Systems, it may void the system’s warranty.
Customer Signature:
Дата
:
_________________________________________________________________________ _____________________________