3D Prototyping X1
41
6. Print setting preferences
6.1. Gcode generator setting
figure6.11
Usually, only Print mode needs to be adjusted. We suggest to use the defaulted setting for
printing, or, the extruder might get blocked with the filament.
There are 4 options to set the print resolution between 0.15mm to 0.35mm per layer. The
finer the layer, the better the quality, the stronger the printed part and the longer it takes to
print.
MODE-Fast: 0.35mm layer thickness
；
MODE_Midium
：
0.25mm layer thickness
；
MODE-Quality
：
0.15mm layer thickness
；
MODE-Standard
：
0.2mm layer thickness
；
Summary of Contents for X1
