Pannoramic SCAN 150 1.15 User’s Guide
5 Troubleshooting and Maintenance
Caution!
Use caution to prevent contact between the safety rails
(5)
and the
scan camera as you take cover
(1)
off.
3.
Turn eccentric screw at the front of the baseplate by 90° anticlockwise and use both hands
to carefully raise and take cover
(2)
off.
4.
After finishing the necessary maintenance or repair work, put the covers (cover
(2)
at first,
then cover
(1)
) back into place and lock them in their positions. To do this, turn the
eccentric screws clockwise
(A)
.
Caution!
Make sure that no cables of the scan camera are squeezed as you
replace the covers.
5.3.2 Replacing the halogen lamp
Figure 69 – Replacing the halogen lamp
March 13, 2012 - Rev. 1
3DHISTECH Ltd.
116(132)
